Underwater Camera Waterproofing Depth

The underwater camera has a water depth of 656 feet, and it does not require additional housing protection at this depth.

Underwater camera can automatically cover the video dive log data, with automatic white balance function. The battery can be used for two hours per charge. Underwater camera interface support wearing gloves operation, Underwater Camera the underwater camera can shoot up to 4K resolution video, shooting 12 million pixel photos.

The user can set underwater underwater camera, underwater camera with magnetic switch button and vibration feedback. The diving mask fixture is universal and suitable for all diving masks. In addition to waterproof, Octospot underwater camera is also seismic, Underwater Camera built-in electronic anti-shake function helps keep the video smooth and eliminate jitter.

Underwater camera in water when using the precautions

1.TG4 official depth is 15 meters, the official depth of the waterproof shell is 45 meters. Underwater Camera Must not exceed this depth, otherwise it will damage the underwater camera! The The

2. Do not open the battery compartment in the water and the data warehouse lock!

3. In the water, please try to keep steady, reduce the impact of underwater camera or waterproof shell, after the impact of the battery / card cover connection cover, etc. may be opened.

4. If you enter the air conditioning room from the hot and humid outdoor, Underwater Camera please do not immediately open the battery compartment, so as not to fog, affect the use.

Water after the use of maintenance methods.

Underwater camera after you dive also need to do the following:

1. First, the underwater camera into the fresh water soak for 60 minutes or so, remove the underwater camera sand and salt. (The use of waterproof shell customers in the immersion and cleaning process do not open the waterproof shell !!!)

2. repeatedly rinse the equipment with tap water, Underwater Camera repeatedly press the fuselage button.

3. Underwater camera lens outside, the battery / card cover, the interface cover and other inside the water droplets or foreign matter, you must use the fiber-free cloth, cotton swab wipe clean, please gently wipe the waterproof gasket, too much strength may lead to damage.

In order to remove the moisture in the underwater camera, clean the underwater camera after the battery / card cover, the interface cover is opened and placed in a cool ventilated place until completely dry. Do not use the hair dryer blowing hot air treatment, do not in the sun exposure equipment.

4. After the end of the diving every day, please soak the waterproof shell, wipe clean, remove the oring seal, clean after applying a thin layer of silicone oil, Underwater Camera so as not to affect the next day's shooting.