Underwater Light Has A Good Waterproof Design

Underwater lamps are all imported 1W high-power led for the light source, long life, low power consumption, color purity, non-polluting and other notable advantages. The DMX512 control system can achieve a variety of color change effects. Long-term immersion underwater work, protection level up to IP68, the use of low-voltage DC power supply, safe and reliable, high-quality stainless copper shell, elegant, safe and reliable. With a strong ornamental. Underwater Lamp The material is generally stainless steel panel, aluminum lamp body, with strong anti-corrosion, strong impact resistance advantages. and has a good waterproof design, simple maintenance, easy installation. Underwater Lamp The specification is generally between φ80-160mm, the height is 90-190mm.

Underwater lamp Features: All the use of imported 1W high-power led for the light source, long life, low power consumption, color purity, non-polluting and other notable advantages. The DMX512 control system can achieve a variety of color change effects. Long-term immersion underwater work, Underwater Lamp protection level up to IP68, the use of low-voltage DC power supply, safe and reliable, high-quality stainless copper shell, elegant, safe and reliable. With a strong ornamental. The material is generally stainless steel panel, aluminum lamp body, with strong anti-corrosion, strong impact resistance advantages. and has a good waterproof design, simple maintenance, Underwater Lamp easy installation. The scope of application of large natatorium, fountains, aquariums and other places for underwater lighting.

Underwater lamp installation and selection of matters: Underwater lamp is the use of LED technology production of underwater lights. Compared with the traditional underwater lamp, the underwater lamp is more energy-saving and environmental protection, and the lighting changes varied, more decorative, Underwater Lamp is widely used in a variety of landscape lighting systems. However, as the manufacturer of LED lamps, there are some problems needing special attention in the installation of LED underwater lights.

1, the underwater lamp should use DC constant current power supply. In the constant current power supply control, LED wall lamp, LED lights, underwater lights, LED buried lights of the forward pressure drop with the LED chip temperature increases and smaller, such a situation for the underwater lamp and not too much impact. However, Underwater Lamp if the constant pressure drive will cause the underwater lamp chip as the temperature increases the current situation, the serious time may even burn the LED underwater lamp. So the underwater lamp should use DC constant current power supply.

2, need to do a good job in anti-static measures. Underwater lamp products in the process of production and installation of the use of certain anti-static measures, such as: worktable to ground, workers to wear anti-static clothing, anti-static ring, and anti-static gloves, and so on, Underwater Lamp the conditions can be installed anti-static ion blower, but also to ensure that the air humidity installed at about 65%, Lest the air be too dry to produce static electricity. In addition, the different quality of the LED anti-static ability is not the same, high quality of the underwater lamp anti-static ability is stronger.

3, to pay attention to the seal of LED products. No matter what kind of LED lighting products, as long as the application of outdoor, Underwater Lamp are facing the problem of moisture-proof, sealing, the situation for underwater lights is more so. Poor handling of the sealing problem will directly affect the life of the underwater lamp products.