Underwater Lamps Have The Advantages Of Pollution

Underwater lamp is the use of LED technology production of underwater lights. Compared with the traditional underwater lamp, the underwater lamp is more energy-saving and environmental protection, and the light changes varied, more decorative, is widely used In various landscape lighting systems.

Safe installation of underwater lights should be done:

First: first for the lamp selection, to pay attention to the waterproof lamps, power supply voltage, single lamp power consumption;

Second: The calculation of cable diameter: general underwater lamp is the use of low-voltage safety voltage, which involves low voltage large current power supply will affect the line pressure drop, Underwater Lamp must first calculate each line The end of the pressure drop, in advance to retain good redundancy;

Third: The underwater lamp power supply isolation transformer and leakage switch must be arranged outside the 2 area, in order to avoid an electric shock accident;

Four: Whether it is the Ming (stent-type underwater lamp) or installation (embedded underwater lamp) should be reserved 0.6-1 meters long cable line, Underwater Lamp lest the future lighting problems, need to drop water Pool of water, so even if the lamp is broken, from the water can be referred to the surface of the lamp to the water to change the wiring and wiring to do waterproof treatment;

Five: As for other wiring, wiring connectors to do waterproof, Underwater Lamp general water electrician, decoration Basic can be handled!

Underwater lamp Features

All imported 1W high-power led for the light source, long life, low power consumption, pure color, no pollution and other notable advantages. The DMX512 control system can achieve a variety of color change effects. Long-term immersion No underwater work, protection level up to IP68, Underwater Lamp the use of low-voltage DC power supply, safe and reliable, high-quality stainless copper shell, elegant, safe and reliable. With a strong ornamental. Materials generally For stainless steel panels, aluminum lamp body, has a strong anti-corrosion, strong impact resistance advantages. and has a good waterproof design, simple maintenance, easy installation. Applicable scope of large swimming pool, Fountains, aquariums and other places for underwater lighting.

Installation and selection of underwater lights

Underwater lamp is the use of LED technology production of underwater lights. Compared with the traditional underwater lamp, the underwater lamp is more energy-saving and environmental protection, Underwater Lamp and the light changes varied, more decorative, is widely used In various landscape lighting systems. However, as the manufacturer of LED lamps, there are some problems needing special attention in the installation of LED underwater lights.

1, the underwater lamp should use DC constant current power supply. In constant current power supply control, LED wall lamp, LED lights, underwater lights, LED buried lights of the forward pressure drop will increase with the LED chip temperature and

Smaller, this situation does not have much effect on the underwater lamp. But if the constant pressure drive will cause the underwater lamp chip as the temperature increases the current situation is increasing, serious To possibly burn LED underwater lights. So the underwater lamp should use DC constant current power supply.

2, need to do a good job in anti-static measures. Underwater lamp products in the process of production and installation of the use of certain anti-static measures, such as: Working table to ground, Underwater Lamp workers to wear anti-static clothing, with anti-static ring , as well as with anti-static gloves, such as the conditions can be installed anti-static ion blower, but also to ensure that the air humidity at the installation of about 65%, lest the air too dry to produce static electricity. Also, no

With the quality of the level of the LED anti-static is not the same, the quality of high-grade underwater lamp anti-static ability is stronger.

3, to pay attention to the seal of LED products. No matter what kind of LED lighting products, as long as the application of outdoor, are facing the problem of moisture-proof, sealing, Underwater Lamp the situation for underwater lights is more so. Seal Ask Poor treatment of the problem will directly affect the life of the underwater lamp products.