How to Protect underwater Waterproof Camera?

More and more people tends to do some underwater sports. The underwater waterproof camera sports are welcome by hobbies. But can waterproof cameras be used underwater that is a question, let’s look at it.

◆ Before taking the camera out of the waterproof case, you need to assure that the underwater waterproof camera has been cleaned with fresh water. When washing it with fresh water, rinse all the buttons while pressing it again. Because the pressing action can squeeze out the sea water in the button, it is not easy for the button to be salted, which causes the problem that the button cannot be pressed. After cleaning, wipe the camera dry.

◆ Before opening the camera, please prepare the above gadgets-(a clean cloth, cotton swab, silicone grease, O-ring screwdriver).

◆ Push the (lock) button away, pull the (open) key upwards, and then twist the waterproof housing valve open. After opening, you can take out the camera.

◆ After the camera is taken out and opened, use (O-ring screwdriver) to remove the O-ring, and then wipe the O-ring gently with a clean cloth. After wiping the O-ring, please keep the O-ring in a dust-free and clean place.

Note: Avoid pulling too hard to make the O-ring too loose, and it will not be tight with the camera case, which will make the waterproof case easy to get water.

◆ After taking out the O-ring, pick up the cotton swab, and use the cotton swab to carefully wipe the O-ring frame of the waterproof case. Avoid getting small sand and some dust or hair on it, which will make the waterproof case easy to get water.

◆ After wiping clean, squeeze a little silicon grease (silicon) out and put it on your fingers, then knead with your fingers evenly, then apply O-ring to the silicone grease on your fingers to prevent the O-ring from hardening and keep it Of flexibility.

Note: In the process of using silicone grease, be sure to avoid the silicone grease from getting on the sand or hair.

◆ After the O-ring is processed, you can put the O-ring back into the waterproof case, and try to avoid pulling the O-ring excessively, otherwise it will loosen the O-ring.

◆ After installing the O-ring, be sure to keep the desiccant in the case to prevent the camera from moisture and fog. If you don't have a desiccant, you can also use a female sanitary napkin, cut a small piece of new sanitary napkin and place it in the empty space under the camera.

If you  are interested in underwater waterproof camera, you can contact us: info@granfoo-cn.com