How to operate underwater camera equipment more stablely?

When the underwater camera is pressed, the dive team can hold its breath to better maintain the stability of the camera. Because of buoyancy, current swell and surges, it is often difficult for divers to place their cameras underwater, which makes images of underwater photography wobbly.

To solve this problem, the first thing to do is to improve the diving skills of divers to ensure that they are able to control their stability in a chaotic underwater environment.

The companies can refer to the "underwater camera shake caused by the image clarity decline" methods to deal with stability issues.

When pushing, pulling, or shaking the camera lens, the principle of stability and non-beat must be followed. When pushing or pulling underwater camera, you must use small steps or small gestures. In general, the method of pushing the lens is more stable than the method of pulling out the lens.

Finally, the dive salvage team should pay attention to check before the formal drilling and ensure that the verticality of the pile tube, which is not crooked. Design groove bottom elevation above should leave a certain amount of margin, so as not to overdig.

The ground must be manually trimmed 20 cm above the bottom of the groove. Loose soil, silt and large rocks at the bottom of the groove should be cleaned in time, and the groove should be kept dry. The ground should be properly trimmed. The construction of the concrete mat at the bottom of the basic construction well room should ensure immediate drying. The pit should be subject to precipitation when it is encountered.

If you want know more, you can contact us: info@granfoo-cn.com