Home - Knowledge - Details

GRANFOO Underwater Pipe/Well/Borehole Inspection Camera System Model GLF-UDC-V11S

GLF-UDC-V11S underwater camera system from GRANFOO can be used for pipe,well,borehole inspection project, the depth can reach 500 meters, pan 360 degree, tilt 180 degree and zoom can be customized 0~10X. Its appropriate for pipe dimension from 60mm~300mm.

 

Quick Start Guide

1.1 Charging the Battery(12V)

1. Connect the charger to the socket, the indicator of charger will turn into green.

2. Connect the plug to the jack of control box.

3. Turn the switch knob to “CHARGE” position, the indicator of charger will turn into red.

4. When the Li-ion battery is full of power, the indicator of charger will turn into green.

pipe inspection camera.jpg 

1.2 Starting up

Assemble the inspection system

(1) (2)(3)(4) Assemble the rolling handle

pipe inspection camera 2.jpg

pipe inspection camera 3.jpg 

(5) (6)(7) Assemble the meter counter

pipe inspection camera 4.jpg 

(8) (9) Put the cable into the meter counter

 

1.3 Connection

1. Connect two connection wires to the cable wheel as below

 pipe inspection camera 5.jpg

2. Connect the other end to the control box

3. Turn the switch knob to “ON/BATT” position

 pipe inspection camera 6.jpg

4. Assemble fuse

5. Adjust LED brightness

6. Unlock the brake

 well inspection camera 7.jpg

 

1.3 Recording and Menu

Inserting SD Card & Assembling microphone

 

1. Insert SD card to the slot according to the right direction. When take out the SD card, please

push it firstly and SD card will bounce out of the slot, and then take it out.

2&3. Insert microphone to the “MIC” jack.well inspection camera 8.jpg

Recording video

1&2.Press the “REC” button to start record video

3. Press the “REC” button again to finish the recording

well inspection camera 9.jpg

Recording photo

1. Press “MENU”, choose “Recording Mode”, enter “Work Mode”, Select ”Photo”, then press “REC”

back to the homepage

2. Press the “REC” button to snap picture

inspection camera 10.jpg

Playback Video

1. The screen is in the state of recording

2. Press the “PLAYBACK” button

3. The screen shows the “Event Playback” interface

11.jpg 

4. Press the “OK” button to enter the “Video Files”

5. Select the file what you want

6. The monitor plays the video

7. Press the “OK” button to pause the video

12.jpg

Playback Photo

8. Select the photo files what you want

9. The monitor displays the photo

13.jpg14.jpg 

 

 

More detailed information or inquiries, please check our website www.granfoo-cn.com to learn and send us E-mail soon.


Send Inquiry

You Might Also Like